Set up in an afternoon.

No new boiler, no subscription. The hub runs your home on its own, even when the internet doesn't.

The Thermo hub: a rounded square with a turnable ring around a round display showing 21.5 degrees.Heating to21.5°

Three things to do

  1. Fit the hub

    It replaces your wall thermostat: two wires to the boiler, or none at all with a heat pump over OpenTherm. Screw the valves onto your radiators by hand.

  2. Pair in the Thermo app

    The phone app finds the hub over Bluetooth, then adds your valves and any Matter lights or blinds. It takes about ten minutes.

  3. Use it anywhere

    Turn the ring on the hub, open the dashboard on a phone or computer, or mount a tablet in the hallway as a wall panel for the whole family.

Soft to look at. Clear to use.

Soft shadows alone are hard to see, so every control has a darker ring, a written label and a written state. If that still isn't enough, high contrast swaps the shadows for solid borders. It turns on by itself when your device asks for more contrast.

Soft

65%
Mode, soft example

High contrast

65%
Mode, high contrast example

Built for the hallway wall

Wall tablet mode

Any 10 inch tablet becomes a wall panel: controls 20% larger, full screen, dimmed after two minutes and awake with a tap. The first tap only wakes it, so nothing changes by accident.

Try wall tablet mode

Every screen in step

Change the kitchen on your phone and the wall panel shows it within a second.

Works offline

Schedules run on the hub. If the connection drops, screens say so plainly and wait.